Te.cfg Configuration File - Intermec 200 Quick Reference Manual

JANUS 900 MHz Terminal Emulation for the Model 200

TE.CFG Configuration File

! *********************************
! *** TE configuration file
! *********************************
! Note: Comment lines begin with ':' or '!'.
: -------------------------
: Environment Configuration
: -------------------------
: Note: () indicates any text string.
:
: TermType - VT100, VT220, VT320, ANSI, RDRANSI
: TranId - (Transaction ID followed by the system delimiter)
: CommPort - COM1, COM4
: HostName - (Name of the remote host or leave blank to use DCM host)
TermType=VT320
TranId=$TEV,
CommPort=COM4
HostName=
: -------------------
: Janus Configuration
: -------------------
: Note: () indicates any text string.
: [] indicates recommended configuration option.
:
: Preamble - (Any text character string)
: Postamble - (Any text character string, use trailing \r for CR and \t for TAB)
: NumericKeypad - [Disable], Enable
: TextSize - [RegularHeight], DoubleHeight
Preamble=
Postamble=\r
NumericKeypad=Disable
TextSize=RegularHeight
A-12
VT and ANSI configuration information is stored in a configuration file named
TE.CFG. You can use any text editor to modify TE.CFG on your PC before it is
formed into an image and programmed into the JANUS devices. Edit TE.CFG
according to the instructions provided in the file listing.
Note: Refer to your JANUS user's manual for information on programming drive
images on your JANUS device.
***
CODE
ControllerCODE