Table of Contents
Advertisement
JANUS 900 MHz Terminal Emulation for the Model 200
viii
Terms and Conventions
The following special terms and conventions occur throughout the manual.
PC Keypad Input
Keystrokes to be entered into the PC are emphasized in bold. "Choose Y"
means you press the key labeled "Y" on the PC keyboard.
When you need to press and release a series of keys in order, the keys appear
in order with no connectors. "Press Shift A" means that you press and release
the Shift key, and then press A.
When you must press more than one key at the same time, the keys are
connected by a dash in the text. "Press Ctrl-Alt-Del" means that to perform a
warm boot on the host PC, you need to hold down the Ctrl, Alt, and Del keys
at the same time. When the keys are connected by a dash, you must press and
hold the keys in the order shown.
JANUS Keypad Input
(
Key icons represent keystrokes you enter on the JANUS device. For example,
"press
" directs you to press the key labeled "
keypad.
PC and JANUS Commands
Command syntax appears in the text as you should enter it into the PC or
JANUS device. For example, to see a listing of directories on the device, type
the following command:
dir
Optional command line parameters are enclosed in brackets [ ].
Notes
The notes in this manual use the following format.
Note: Notes either provide extra information about a topic or contain special
instructions for handling a particular condition or set of circumstances.
IMPORTANT! Is used to flag critical information about a topic.
D>JI
D>JI
code
Controllercode
(
nugg
nugg
" on the JANUS
Advertisement
Table of Contents
