Table of Contents
Advertisement
This chapter lists all of the terminal emulation commands you can use with your
VT100/220/320 and ANSI terminals.
Editing Key Commands - VT220/320 Terminals
IMPORTANT! To scan the bar code labels in this chapter, you must configure your
JANUS device to use Code 39 in Full ASCII mode.
The following editing key commands are listed in alphabetical order. Each
command is listed with its corresponding key sequence and bar code. Program
function keys are listed with their bar codes, but no description is provided
since these keys are programmed differently for each application.
The function of each editing key is determined by the software application you
are using. Refer to your application user's manual for information about the
editing key functions.
Auto-Login Restart
Auto-Login Restart restarts the auto-login script from the correct host name
statement in the script. For this command to work, the WaitFor string must
match the last data sent from the host. For example, if the WaitFor string is the
login prompt "login: " with a space after the colon, the WaitFor string must
include a space for the auto-login restart to work.
Keypad:
Scan:
(".-
(".-
CODE
NUGCODE
NUG
>
Auto-Login Restart
*/EALRS*
*%ALRS*
5
VT/ANSI Commands
5-3
Advertisement
Table of Contents
