Terminal Emulation Files - Intermec 200 Quick Reference Manual

Terminal Emulation Files

The following table lists and describes all of the terminal emulation files.
Environment
3270
5250
VT/ANSI
Common Files
File Name Description
J93270.EXE 3270 terminal emulation executable file for a
900 MHz RF environment. Requires Model 200
Controller v3.X and above.
TE3270.CFG Configuration files for 3270 terminals.
Terminal emulation configuration information
is saved to this file.
JAN3270.MAP Key mapping file for JANUS 3270 terminal
emulation. Read only file.
J95250.EXE 5250 terminal emulation executable file for a
900 MHz RF environment. Requires Model 200
Controller v3.X and above.
TE5250.CFG Configuration files for 5250 terminals.
Terminal emulation configuration information
is saved to this file.
JAN5250.MAP Key mapping file for JANUS 5250 terminal
emulation. Read only file.
TNVT900.EXE VT/ANSI terminal emulation executable for a
900 MHz RF environment. Requires Model 200
Controller v3.X and above.
TE.CFG Configuration file for VT100/220/320 and
ANSI terminals.
TE.BAT Starts the terminal emulation application.
TE.SEC Terminal emulation security file. You must
have TE.SEC to access to the terminal
emulation configuration menu.
AUTOLOG.SCR Optional file. This is a script file containing
auto-login script information. This file must be
present if the auto-login feature is used.
DISPTBLS.MAP Optional file. This is a file containing Code
Page 850 information which allows for single
byte international character support when you
run the terminal emulation program.
A
CODEReference CODE
A-7