Table of Contents
Advertisement
TE.CFG Configuration File (continued)
: ---------------------
: Session Configuration
: ---------------------
: Note: [] indicates recommended configuration option.
:
: InputMode
- CharMode,[LineMode]
: ViewportMode - [Auto], Manual
: ProtocolMode - Standard, Enhanced, [0200R1]
InputMode=CharMode
ViewportMode=Auto
ProtocolMode=0200R1
: -------------------------
: VT Terminal Configuration -- For VT terminals only
: -------------------------
: Note: [] indicates recommended configuration option.
:
: KeypadMode
- [Numeric], Application
: CursorMode
- [Cursor], Application
: TermMode
- [VT100], [VT220-7bit], VT220-8bit, [VT320-7bit], VT320-8bit
: UserDefinedKey - [Unlock], Lock
KeypadMode=Numeric
CursorMode=Cursor
TermMode=VT320-7bit
UserDefinedKey=Unlock
: -------------------------
: VT Terminal Key remapping
: -------------------------
: Note: <keysym> = bios keycode in hex. Must be 4 bytes.
:
string
= Text string to send can include mneumonics ie <CR>
:
:
: Remap
- = <keysym> = "string"
: Macro
- = <keysym> = "string"
: RunMacro
- = <keysym>
: The following will remap CTL-F1 if uncommented
:Remap=<405E>="send this to the host<CR>"
: remap CTL-F2
:Remap=<405F>="send something else to the host<CR>line 2<CR>"
: macro for 'a'
:Macro=<0061>="macro number 1<0d>"
: macro for 'e'
:Macro=<0065>="multi line macro <CR>line 2<0d>line 3<CR>"
: use CTL-F5 as run macro key
:RunMacro=<4062>
or two byte hex.
Must be quoted.
A
CODEReference
CODE
A-13
Advertisement
Table of Contents
