Intermec 200 Quick Reference Manual page 34

JANUS 900 MHz Terminal Emulation for the Model 200 Controller
4. Use the
5. After making your changes, highlight Exit Config
6. After entering all configuration parameters, you can
3-4
: U
or to highlight the function that you
want to configure and press
@
and press to exit the configuration application.
save the configuration you created during the
session.
Choose Yes and press
configuration options. Configuration options are
saved to the RAM drive, drive E.
Choose No and press
save the configuration options. You then exit to
the DOS prompt.
Choose Cancel and press
Configuration Menu. This option gives you an
opportunity to change or correct the configuration
options that you selected.
code2 code2
nugg nugg
@
.
@
if you want to save the
@
if you do not want to
@
to return to the TE