Intermec 200 Quick Reference Manual page 82

JANUS 900 MHz Terminal Emulation for the Model 200
Error Message
Field not in
Field Format Table
(5250 error)
FM Field Required
(5250 error)
Function not implemented
(5250 error)
Help Not Processed
(5250 error)
Invalid control sequence
Mandatory field!
Monocase Only
(5250 error)
No more room for insert
Numeric Only
Protected Field
Roll Down Not Processed
(5250 error)
Roll Up Not Processed
(5250 error)
Signed Numeric Only
(5250 error)
6-4
Problem
The cursor is not positioned
correctly in a data input field.
You have pressed a Field Mark
key in a field that does not have
the DUP bit enabled.
You have pressed an
unsupported function key or
entered an invalid key sequence.
The host was unable to process
your Help request.
You have pressed an
unsupported function key or
entered an invalid key sequence.
You have attempted to bypass a
mandatory data entry field using
a Field +, Field -, or Field Exit
key.
You have entered an invalid
character in a monocase only
field.
You have entered more
characters than allowed in a
field.
You have entered an invalid
character in a numeric only field.
You are attempting to enter data
in a protected region of the
screen.
The host computer was unable to
process your Roll Down request.
The host computer was unable to
process your Roll Up request.
You have entered an invalid
character in a signed numeric
field.
Controllernugget nuggetC39
Solution
Position the cursor correctly and try
again.
Enter a valid command for this type of
field.
Try the function again using the correct
key sequence.
Press
try again.
Enter a valid key sequence.
Enter data in the field.
Enter a valid character for this type of
field.
Press
using fewer characters.
Enter a valid character for this type of
field.
Press
Press
try again.
Press
try again.
Reenter a valid character for this type of
field.
C39
to reset the terminal and
to reset the terminal. Retry
to reset the terminal.
to reset the terminal and
to reset the terminal and