Event Log Configuration - Advantech ARK-3403 User Manual

! Power Management/APM
Enable or disable APM.
! Power Button Mode
Power on, off, or enter suspend mode when the power button is pressed. The
following options are also available.
! Restore on AC power Loss
Use this to set up the system response after a power failure. The "Off" setting
keeps the system powered off after power failure, the "On" setting boots up the
system after failure, and the "Last State" returns the system to the status just
before power failure.
! Video Power Down Mode
Power down video in suspend or standby mode.
! Hard Disk Power Down Mode
Power down Hard Disk in suspend or standby mode.
Standby Time Out
!
Go into standby in the specified time.
! Suspend Time Out
Go into Suspend in the specified time.
Resume On Ring
!
Enable / Disable RI to generate a wake event.
! Resume On PME#
Enable / Disable PME to generate a wake event.
! Resume On RTC Alarm
Enable / Disable RTC to generate a wake event.
3.4.8

Event Log Configuration

Figure 3.13 South Bridge ACPI Configuration
31 ARK-3403 User Manual