Unpacking - Intermec EasyCoder 201 II Technical Manual

Intermec EasyCoder 201 II – Technical Manual
INSTALLATION, cont'd.

Unpacking

Machine Sign
Before starting the installation, carefully examine the delivery for
possible damage or missing parts:
Open the box and lift the printer, together with the foam-plastic
shock absorbers, out of the box.
Remove the shock absorbers and check that the machine has not
been visibly damaged during the transportation. Keep the pack-
ing material until you are sure that the printer functions properly.
The machine sign on the printer's rear plate gives information on:
• Type
• Part Number
• Serial Number
Thermal Printer 201
Model #
1-201011-11
Serial #
50105
115-230V 2.6-1.3A 50-60Hz
This equipment complies with the requirements for a Class A computing device in FCC Rules
Part 15 Subpart J. Operation of this device in a residential area may cause harmful interference
requiring the user to take whatever steps may be necessary to correct the interference.
INTERMEC PRINTER AB
Check the printer in regard to possible options ordered.
Check that the mains cord has a pin configuration that will fit into
a wall socket according to the local standard.
European type
230V mains plug
Should any kind of damage have occurred during transportation,
immediately make a complaint to the carrier.
Any incorrect delivery or missing parts should be reported to the
distributor.
U L
R
LISTED 65B5 LR67809
V
D E
MADE IN SWEDEN
geprüfte
Sicherheit
N309
MADE IN SWEDEN
US/Canadian type
115V mains plug
GB type
230V mains plug
13