Technical Manual - Intermec EasyCoder 201 II Technical Manual

Intermec EasyCoder 201 II – Technical Manual
SETTING UP EASYCODER 201 IIE & 201 IISA, cont'd.
Detection, cont'd.
Feed adjustment:
STARTADJ:
[0]:
The present value of the start adjustment is displayed within
brackets. Accept the value by pressing < Enter >, or type a new
value and press < Enter >.
STOPADJ:
[0]:
The present value of the stop adjustment is displayed within
brackets. Accept the value by pressing < Enter >, or type a new
value and press < Enter >.
Action
New value
Negative value
Acknowledge setup and proceed
EasyCoder 201 IIE EasyCoder 201 IISA
Numeric keys Numeric keys
< . >
< Enter >
< - >
< Enter >
40