Removing And Replacing The Led Clip And Cable; Section 3.8 "Removing And Replacing The Led Clip And Cable - Sun Microsystems StorEdge MultiPack-FC Installation, Operation And Service Manual

11. Turn on the power to the system.
See Section 2.4.1 "Powering On the System".
3.8 Removing and Replacing the LED Clip
and Cable
Note – The LED clip contains the LED board, and together with the LED cable they
are a field replaceable unit.
Caution – The power must be turned off and the power cord must be removed
from the MultiPack-FC before the parts removal procedures are attempted.
Caution – Remove all I/O cables from the MultiPack-FC before the parts removal
procedures are attempted.
3-24 Sun StorEdge MultiPack-FC Installation, Operation, and Service Manual • August 2000