Sun storedge 3000 family scsi array best practices manual (28 pages)
Summary of Contents for Sun Microsystems StorEdge A5000
Page 1
™ Product Notes ™ ™ FormerlytheSun EnterpriseNetworkArray Sun Microsystems Computer Company A Sun Microsystems, Inc. Business 901 San Antonio Road Palo Alto, CA 94303-4900 USA 1 650 960-1300 fax 1 650 969-9131 Part No.: 805-1018-13 Revision A, June 1998 Send comments about this document to: smcc-docs@sun.com...
Page 2
Manager, Solstice DiskSuite, Sun Enterprise, Sun Enterprise Network Array, et Solaris sont des marques de fabrique ou des marques déposées, ou marques de service, de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
Page 3
Sun StorEdge A5000 Product Notes The Sun StorEdge A5000 Product Notes provides product notes for the Sun™ StorEdge™ A5000 disk array. This information includes: Supplemental installation notes Sun StorEdge A5000 Installation and Service Manual changes Data migration Supplemental Installation Notes For a complete list of required patches, as well as known bugs, access the “Storage &...
Data Migration This section describes how to migrate data from SPARCstorage™ arrays to Sun StorEdge A5000 disk arrays. It includes procedures for migrating data using Sun StorEdge Volume Manager™ or Solstice™ DiskSuite™ to new Sun StorEdge Volume Manager software.
Page 5
9. Install or upgrade the Sun StorEdge Volume Manager software, if needed. 10. Install applicable Sun StorEdge Volume Manager software patches. 11. Upgrade the Solaris operating environment, if needed. 12. Install applicable Solaris patches. 13. Check the software installation using the luxadm command. Sun StorEdge A5000 Product Notes...
Page 6
14. Set up Sun StorEdge Volume Manager volumes. For systems already using Sun StorEdge Volume Manager software, just add the disks in the StorEdge A5000 array(s). Otherwise, initialize the Sun StorEdge Volume Manager software and then add the disks. 15. Copy data from the SPARCstorage array(s) to the StorEdge A5000 array(s).