Installing A Drive - Sun Microsystems StorEdge MultiPack-FC Installation, Operation And Service Manual

5. Press Return to complete the luxadm remove_device command.
For example:
Hit <Return> after removing the device(s).
Device: /dev/rdsk/c3t8d0s0
Removing Logical Nodes:
Removing c3t8d0s0
Removing c3t8d0s1
Removing c3t8d0s2
Removing c3t8d0s3
Removing c3t8d0s4
Removing c3t8d0s5
Removing c3t8d0s6
Removing c3t8d0s7
3.5.4

Installing a Drive

1. Use the luxadm insert_device command to install the replacement drive.
For example:
# luxadm insert_device
The list of devices which will be inserted is:
Device: /dev/rdsk/c3t8d0s0
Please enter 'q' to Quit or <Return> to Continue:
Hit <Return> after inserting the device(s).
Note – Do not press Return until Step 2 and Step 3 have been completed.
2. Install the new drive.
Slide the drive into the slot with the handle released. Once you have inserted the
drive as far as it will go, push down on the handle to secure it.
3. Reinstall the drive access panel and lock it.
3-12 Sun StorEdge MultiPack-FC Installation, Operation, and Service Manual • August 2000