Connecting The Antistatic Wrist Strap; Removing A Drive - Sun Microsystems StorEdge MultiPack-FC Installation, Operation And Service Manual

Hard drive array

Table of Contents

3.5.2

Connecting the Antistatic Wrist Strap

Caution – The drive array is sensitive to static electricity. To prevent damage to the

unit, connect an antistatic wrist strap to your wrist and to the chassis.

1. Attach the adhesive copper strip to a metal surface of the chassis.

2. Wrap the other side of the wrist strap twice around your wrist, with the adhesive

side against your skin.

FIGURE 3-7

3.5.3

1. Identify all volumes or applications that use the failed drive.

If the volumes are mirrored or RAID 5 protected, the drive can be replaced without

taking the volume down. Otherwise all input/output to the drive must be stopped

using the appropriate commands.

3-8

Sun StorEdge MultiPack-FC Installation, Operation, and Service Manual • August 2000

Attaching the Wrist Strap

Table of Contents

Table of Contents

Do you have a question about the StorEdge MultiPack-FC and is the answer not in the manual?