Turn On The Terminal - Intermec Trakker Antares 2410 Quick Start Manual

C d 39 nuggetfont
Replace the battery pack with P/N 069428, P/N
069429, P/N 073929, or P/N 073930 only. The
use of any other battery pack may present a risk of
fire or explosion.
Attention Danger: Remplacez le bloc-batterie
principal par la pièce réf. n° 069428, réf. n°
069429, réf. n° 073929, ou réf. n° 073930
seulement. L'utilisation de tout autre bloc-batterie
présente un risque d'incendie ou d'explosion.
Contact your local Intermec sales representative for replacement
main battery packs. DISPOSE OF USED BATTERY PACKS
PROMPTLY. KEEP THEM AWAY FROM CHILDREN.
To install the battery pack

Turn On the Terminal

Before turning on the terminal, you should familiarize yourself
with the terminal's keypad. For help, see "Using the Keypad" on
page 15.
The Suspend/Resume key is the _ key in the middle of the
bottom row of the keypad. When you press _ to turn off the
terminal, the terminal does not actually shut off, but it goes into
a Suspend mode. You can configure the terminal so that when
you press _ to turn it on, it either to resumes exactly where it
was when you turned it off or to boots and restarts your
application.
8 Trakker Antares 241X Handheld Terminal Quick Start Guide
241XG010.eps