Using The Keypad - Intermec Trakker Antares 2410 Quick Start Manual

C d 39 nuggetfont
To change the TE 2000 configuration
1 On your terminal, press ) !. If you have a 37-key keypad,
press ( 5. The TE 2000 main menu appears.
Main Menu
1) Set-up Parms
2) LCD Parms
3)
4) Tests
5) Version Info
6) Exit Menus
7) More
2 Select Set-up Parms and press \. A password prompt
appears.
3 Type C R 5 2 4 0 1 and press \.
4 Select Protocol Opts, Data Stream, and then select the
appropriate TE 2000 configuration.
5 Save your changes by selecting Exit Menus from the TE
2000 main menu. Press Y, and type C R 5 2 4 0 1 at
the Enter Password prompt.
For help using TE 2000 terminal emulation, see the appropriate
TE 2000 guide listed on page 19.

Using the Keypad

Characters, symbols, and functions are printed in four places on
or above the keys. The keys are also color-coded to make it easier
to remember key combinations.
Trakker Antares 241X Handheld Terminal Quick Start Guide
24XXS080.eps
15