Using Funk Security - Intermec CK31G User Manual

Chapter 2 — Configuring the CK31G

Using Funk Security

38
If you are using 802.1x security, this section also assumes that
your authentication server and authenticators are properly
configured.
Funk Odyssey security provides everything you get with
Microsoft security with the addition of CCX v1.0 compliance.
Funk security also enables you to use LEAP and TTLS
authentication on your CK31G.
The type of security you choose is not dependent on your
authentication server. To use Funk security, you need to:
• Select Funk security as your security choice
• Select a profile
Selecting Funk as Your Security Choice
The default security setting is Microsoft. If you want to use
Funk security, you need to select it as your security choice.
To select Funk security as your security choice
1 Tap the Start icon or press C and then B. The Start menu
appears.
2 Select Intermec Settings. The Intermec Settings application
appears.
3 Select Communications > 802.11 Radio > Security Choice.
4 From the Security Choice list, select Funk Security.
5 Press Enter. An alert box appears telling you that you must
save your settings and warm boot the CK31G for your new
security choice to take effect.
6 Tap OK or press Esc to clear the alert box.
7 Save your settings.
8 Warm boot your CK31G by pressing and holding the I key
for five seconds.
CK31G Handheld Computer User's Manual