Chapter 1 — Using the CK31G Handheld Computer
Using the SD Card
22
You can use a Secure Digital (SD) card to increase file storage
and install software. The CK31G currently supports 256MB
and 1GB SD cards. The SD card slot is located on the top of the
CK31G just above the laser scanner window.
To insert an SD card
1 Press I to turn off the CK31G.
2 Unscrew the two captive screws on the SD card door and
remove the door.
3 Gently insert the SD card into the CK31G with the printed
side facing the keypad and screen side of the CK31G.
4 Push the card into the slot until it latches in place.
5 Replace the door and attach it with the two captive screws.
CK31G
SD card
CK31G Handheld Computer User's Manual