Intermec CK31G User Manual page 57

CK31G Handheld Computer User's Manual
Configuring 802.1x Security With Funk Security
1 Make sure you have configured the communications and
radio parameters on your CK31G.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Funk Security > Profile.
5 For Association, choose Open and then press Enter.
6 For Encryption, choose WEP and then press Enter.
7 For Authentication, choose TTLS, PEAP, or TLS and then
press Enter.
If you choose TTLS or PEAP:
a Select User name, type your user name, and then press
Enter.
b Select Password prompt, choose Enter password now,
and then press Enter.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c Select User Password, type a user password, and then
press Enter.
d For Validate Server Certificate, choose Enabled and press
Enter.
If you choose TLS:
a Load a user and root certificate on your CK31G. For help,
see "Loading a Certificate" on page 50 for help.
b For Validate Server Certificate, choose Enabled and press
Enter.
c You can also enter a User Name, Subject Name and
Server Common Name if you want to increase your level
of security.
8 Exit Intermec Settings.
Chapter 2 — Configuring the CK31G
45