Scanning Bar Codes - Intermec CK31G User Manual

Chapter 1 — Using the CK31G Handheld Computer

Scanning Bar Codes

20
Changing the Beeper Volume
Method
Use the keypad.
Use the Intermec
Settings application.
Do not look directly into the window area or at a reflection
of the laser beam while the laser is scanning. Long-term
exposure to the laser beam can damage your vision.
The 2D imager provides the ability to scan 2D bar code
symbologies and supports omni-directional (360°) scanning.
Omni-directional scanning means that you can position the
CK31G in any orientation to scan a bar code label. Using the
2D area imager is very similar to taking a picture with a digital
camera.
When you unpack the CK31G, these bar code symbologies are
enabled:
• Code 39
• Code 128
• PDF417
• UPC/EAN
• DataMatrix
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on the CK31G.
Use Intermec Settings to enable and disable symbologies for
your scanner. For help understanding how to use Intermec
Settings, see "Configuring the CK31G Locally With Intermec
Settings" on page 28.
Procedure
Press C and then press E to increase the volume.
There are five beep volumes on the CK31G
including off. When you reach the loudest setting,
the next setting is off.
From the Start menu, choose Intermec Settings. Go
to Device Settings > Beeper > Volume.
CK31G Handheld Computer User's Manual