Intermec CK31G User Manual page 42

Chapter 2 — Configuring the CK31G
30
Use this table to understand how to navigate and enter
information in Intermec Settings.
Navigating in Intermec Settings
To Do This:
Select or expand an option
Select text in a text box
Expand an option
Save settings
Restoring Default Settings
You can restore the CK31G to factory default settings from
Intermec Settings. For a complete list of the default settings, see
"Default Configuration" on page 102.
Note: Using the Restore Defaults option resets all network
parameters. As a result, you may lose network communications.
This option should only be used by network administrators or
by Intermec support personnel.
To restore factory default settings
1 From Intermec Settings, select Device Settings > Restore
Defaults.
2 Select Restore Defaults and choose the Run App button. A
Run Application dialog box appears asking if you want to run
the restore defaults program.
Press:
• Tap the option
• or to select an option
• From the highlighted option, press Tab
• Tap in the text box and drag the stylus
over the text
• Tap the option
• Press or to select an option and
then press Alt-
• Tap File > Save Settings
• Press Alt-F and then press Enter
CK31G Handheld Computer User's Manual