Menu Option 1 Backup - Intermec 6212 User Manual

APPENDIX B
"
" NOTE:
[YES] CONTINUE does not appear until the conditioning cycle is
complete.
A condition cycle cannot be stopped by any means except
when the charge is removed or when there is a power fail-
ure.

Menu Option 1 BACKUP

" NOTE:
The backup battery conditioning cycle takes up to 22.5 hours to com-
plete when the backup battery is fully charged at the beginning of the
cycle.
A condition cycle cannot be stopped by any means except
removing the charge, when there is a power failure, or in
extreme temperatures. Conditioning is not allowed and is
NO ERRORS The status of the battery conditioning
cycle. If the battery conditioning fails, one of the fol-
lowing messages appears:
"OLD POWER SUPPLY
"
NOT SUPPORTED"
"CANNOT CONDITION
"
BOTH MAIN AND BKUP"
"CHARGE LOST DURING
"
CONDITION CYCLE"
"CHARGE NOT ENABLED"
"
"TEMPERATURE TOO
"
HOT OR COLD"
"POWER FAILURE"
"
"SYSTEM SUSPENDED"
"
"NO BATTERY"
"
"INIT FAILED
"
NOT SUPPORTED"
"ERROR #NNN"
"
Unknown error code meaning occurred.
6212 Hand-Held Computer User's Guide
PEN*KEY R Utilities Program
B B - - 3 3 3 3