Installing The Backup Battery; Figure 2-1 Installing Back Up Battery - Intermec 6212 User Manual

SECTION 2

Installing the Backup Battery

" NOTE:
Backup battery must be installed before using your computer for the
first time.
" NOTE:
Remove backup battery before storing your computer for longer than
a week.
Refer to Figure 1-2 when completing steps 1 and 2.
1. Use a flat blade screwdriver to loosen the four quarter-
2. Drape the door over the top or off to the side, free of
Refer to Figure 2-1 when completing these steps.
3. Using a nonmetallic object, such as a pen, push the
4. Push the battery down into the compartment
5. Replace PC memory card and back up battery
turn screws of the PC memory card door.
the compartment.
connector on the battery pack down into the socket.
compartment door.
1. Keyed backup battery connector jack
2. Backup battery connected
Figure 2-1
Installing Back Up Battery
6212 Hand-Held Computer User's Guide
Hand-Held Computer Operation
2
1
2-3