Cleaning Your Hand-Held Computer; Case And Display; Surface Connectors - Intermec 6212 User Manual

Hand-held computer

Hide thumbs Also See for 6212:

Table of Contents

SECTION 3

Cleaning Your Hand-Held Computer

Periodic cleaning helps maintain the appearance and reli-

ability of your hand-held computer. When cleaning your

hand-held computer, inspect the keyboard, handstrap, cov-

ers, display, connectors, and peripheral products for obvious

signs of damage or wear.

B CAUTION:

Do not use any abrasive cleaning compounds, ketonic solvents

(acetone or ketone) or aromatic solvents (toluene or xylene) to

clean any part of your hand-held computer. These solutions will

cause permanent damage to your hand-held computer.

Never pour cleaners directly on the hand-held computer.

Instead put the cleaner on a soft cloth and gently wipe the

case.

We recommend cleaning the exterior of your hand-held com-

puter using a soft cloth dampened with:

If surface connectors become dirty or tarnished, clean them

with a cotton swab dipped in alcohol. It may also be

necessary to lightly burnish them with a pencil eraser.

Check the connectors on the docks or printers to ensure

they are clean.

MICRO-CLEAN II cleanser, made by Foresight In-

ternational, Inc. 4887 F Street, Omaha, NE

68127-0205 (telephone number 1-800-637-1344)

Glass cleaners or isopropyl alcohol

6212 Hand-Held Computer User's Guide

Routine Care and Maintenance

3-3

Table of Contents