Main Battery Installation; Figure 2-3 Opening Battery Compartment - Intermec 6212 User Manual

SECTION 2

Main Battery Installation

1. Place your hand-held computer face down on a flat
2. Open the battery compartment door by turning the
" NOTE:
Use a screwdriver or coin that fits the slot properly. A correct fit pre-
vents wear on the latch knob corners.
3. Take hold of the handstrap near the latch knob. The
4. Pull the handstrap and battery compartment door
surface. Prop the top end up to avoid pressing any
keys.
latch knob attached to the handstrap in the direction
of the arrow toward the position of the open padlock
symbol. Use a flat blade screwdriver or the edge of a
coin, to turn the latch knob.
1. Latch knob position indicator
2. Open position indicator
Figure 2-3
Opening Battery Compartment
compartment door is attached to the handstrap.
down toward the bottom and lift the strap up, then
away from the main battery compartment.
6212 Hand-Held Computer User's Guide
Hand-Held Computer Operation
1
2
2-5