Packing; Return Of Hazardous Waste; Return Of Analyzer - mru SWG100 BIO-EX User Manual

MRU GmbH
Safety regulations
The analyzer may only be used as indicated in this manual. Our analyzers are checked
according to the following regulations:
VDE 0411 (EN61010) and DIN VDE 0701 before they leave the MRU GmbH factory.
MRU technical products are designed and manufactured according to DIN 31000/ VDE
1000 and UVV = VBG 4 of the professional guilds for fine mechanics and electrical
engineering.
MRU GmbH assures that the analyzer complies to the essential requirements of the legal
regulations of the member states of the electro-magnetic compatibility (89/336/EWG)
and to the low-voltage regulations (3/23/EWG).
Specific safety regulations
No part of the analyzer, or any other metal parts & accessories shall be used as electric
conductors.
The analyzer shall not be used in or under water.
The analyzer shall not be placed near or directly exposed to open fire or heat.
The analyzer shall avoid dropping.
Moisture or condensate, being pumped out of the
condensate outlet port can be slightly acidic.
In case of skin contact IMMEDIATELY: clean affected parts of
the body.
Avoid getting liquid in eyes.
Please carefully clean all parts that come into contact with the
condensate.

1.7. Packing

Packing regulation of 12.07.1991
If your local waste facility does not accept MRU packing materials for disposal, you may
return it to MRU or our local sales representative. Packing materials returned to MRU
must be returned prepaid.

1.8. Return of hazardous waste

Waste Disposal/Returns/Warranty -
MRU GmbH is required to accept the return of hazardous waste such as electro-chemical
sensors that cannot be disposed of locally. Hazardous waste must be returned to MRU
prepaid.

1.9. Return of analyzer

MRU GmbH is required to accept the return, for proper disposal, of all analyzers
delivered after 13th of August 2005. Analyzers must be returned to MRU prepaid.
SWG 100 BIO Ex User Manual
CAUTION
of
Page 11 150