mru SWG100 BIO-EX User Manual page 44

MRU GmbH
Left-side
Be sure, that the heat sink has enough distance to the next wall.
Be sure that the Zero gas inlet feeds fresh, clean air.
Reference:
1. Fitting for PTFE tubing 4/6 mm G1/8"
thread
2. Flow restrictor orifice G1/8" thread.
3. Zero gas filter G1/8" thread
SWG 100 BIO Ex User Manual
2
1
3
1
CAUTION
CAUTION
Heat sink:
Do not cover the
heat sink from the
gas cooling- unit.
Calibration gas inlet
Fitting: 1/8 in. ISO parallel thread.
Zero gas inlet:
Fitting: 1/8 in. ISO parallel thread.
Condensate outlet (Option:
65408)
Fitting: 1/8 in. ISO parallel
Page 44
of
150