Adjusting The Sequin Device; Adjusting The Sequin Cutting Position - KANSAI SPECIAL LX-SP Series Instructions Manual

【4】ADJUSTING THE SEQUIN DEVICE

4-1 Adjusting the sequin cutting position

■ F eed a sequin by pushing the feeding bar. A
reference figure is on the page. 6. (Fig.16)
■ C ut a sequin by pushing down the movable knife as
the figure on the right. (Fig.14)
※ No necessary to adjust.
※ Move forward the feeding nail toward
the movable knife.
※ Move backward the feeding nail
in the opposite direction
※ In case of 3mm sequin, adjust the feeding
nail position at the second sequin from
the movable knife.
Correct cutting position
Wrong cutting position ( a )
Wrong cutting position ( b )
against the movable knife.
5
(Fig.14)
-
-
Ｌ Ｘ Ｓ Ｐ s e r i e s
Ｌ Ｘ Ｓ Ｐ s e r i e s