Setting Up & Operating The Control Box; Description; Connecting The Power Wire - KANSAI SPECIAL LX-SP Series Instructions Manual

【5】SETTING UP & OPERATING THE CONTROL BOX

5-1 Description

■ T he sequin pitch (feeding amount) and skip pattern (sequin interval) are both changeable
by operation panel setting and machine adjustment.
■ M ax. speed 600 rpm is available, and insures stable operation for the sequin feed.

5-2 Connecting the power wire

■ P ower wires extend from the control box as the following figure.
Connect both a white and a black wire to AC220V power supply.
Connect a green wire (earth wire) to the ground.
<Caution 1.>
The control box
single-phase AC220V power type.
The different power use certainly causes
machine failure.
<Caution 2.>
The earth wire must be connected to the ground.
<Caution 3.>
An unstable electric power supply may cause
the machine malfunctions.
To avoid this problem, strongly recommend to
use the Constant Frequency Voltage Power
Supply (CVFT), and the Uninterruptible Power
Supply (UPS).
can be used
9
(Fig.27)
for only
-
-
Ｌ Ｘ Ｓ Ｐ
Ｌ Ｘ Ｓ Ｐ
s e r i e s
s e r i e s