Setting The Server Ip Port Number - Ingenico i6550 User Manual

Setting the Server IP Port Number

6.4.15
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Setup Port
Port1
Port2
Port3
Port3
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
DHCP
Local IP
Local IP Port
Server IP
Server IP Port
Server IP Port
Old Value: XXXXX
Enter New Value:
Ingenico 6500 User's Guide
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Press [ ], [ ], [ ], [Enter] to select Supervisor
Menu.
Key password [2] [6] [3] [4], then press [Enter].
Press [ ], [ ], [ ], [Enter] to select Sys
Parameters.
Press [ ], [Enter] to select Setup Port.
Press [ ], [ ], [Enter] to select Port3, the E-NET
port - Ethernet.
Press [ ] eight times, then press [Enter] to select
Server IP Port.
Enter the server IP port number.
51