Configuring The Host Port Auto Detect Feature; Disabling Or Enabling The Auto Detect Feature - Ingenico i6550 User Manual

Configuring the Host Port Auto Detect Feature

6.5
By default, the Host port is set to automatically detect the communications method being used:
RS232, RS485 IVI LAN protocol, RS485 Tailgate protocol, USB, or PoweredUSB.

Disabling or Enabling the Auto Detect Feature

6.5.1
By default, the Host port's Auto Detect feature is enabled.
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Auto Detect
Auto Detect
AD On/Off
AD Timeout
AD Retry Times
AD On/Off
Off
On
Ingenico 6500 User's Guide
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Press [ ], [ ], [ ], [Enter] to select Supervisor
Menu.
Key password [2] [6] [3] [4], then press [Enter].
Press [ ], [ ], [ ], [Enter] to select Sys
Parameters.
Press [ ], [ ], [ ], [Enter] to select Auto Detect.
Press [Enter] to select On/Off.
Select the option you want.
59