Defining The Dhcp Address - Ingenico i6550 User Manual

Defining the DHCP Address

6.4.11
DHCP is dynamic host configuration protocol. If the terminal is working in Ethernet mode, and
if DHCP is ON, the terminal can ask the remote server to assign an IP address for it.
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
Enter Password:
Supervisor Menu
Change Password
Application File
Security
Sys Parameters
Sys Parameters
Download Method
Download Port
Setup Port
Setup Port
Port1
Port2
Port3
Port3
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
Retry Count
Response TMO
DHCP
DHCP
None
Auto
Updating
Ingenico 6500 User's Guide
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Press [ ], [ ], [ ], [Enter] to select Supervisor
Menu.
Key password [2] [6] [3] [4], then press [Enter].
Press [ ], [ ], [ ], [Enter] to select Sys
Parameters.
Press [ ], [ ], [Enter] to select Setup Port.
Press [ ], [ ], [Enter] to select Port3, the E-NET
port - Ethernet.
Press [ ] seven times, then press [Enter] to select
DHCP.
Select None or Auto, and then press [Enter].
47