Maintenance; Legal Information - Otto Bock 17KL19 Instructions For Use Manual

1) Rinse the product with clear fresh water.
2) Dry the product with a cloth or allow it to air dry. Avoid exposure to direct
heat (e. g. from an oven or radiator).

8 Maintenance

INFORMATION
The product may be exposed to increased loads by the patient.
► Shorten the maintenance intervals according to the expected loads.
The manufacturer requires an inspection of the product every 6 months to
verify functionality and check for wear at a minimum.
A service kit can be ordered for product maintenance.
Spare parts are listed in the section "Components/design".
Only use 633F7 special lubricant.
Before handing the orthosis over to the patient, secure all screw connec­
tions with Loctite 241.
If you have any doubts, please contact the manufacturer.
9 Disposal
Dispose of the product in accordance with national regulations.

10 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
10.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on medic­
al devices. The CE declaration of conformity can be downloaded from the
manufacturer's website.
16