Instructions For Use - Otto Bock 2C12 Instructions For Use Manual

Hide thumbs Also See for 2C12:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
1.2 Combination possibilities
Designation
Prosthetic foot
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fit­
tings.
2.2 Environmental conditions
Observe the prosthetic foot's environmental conditions.
Other environmental conditions
UV light
Hydrolysis
2.3 Lifetime
The product is a wear part, which means it is subject to normal wear
and tear.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or
CAUTION
injury.
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION!
Risk of injury and risk of product damage
► Note the combination possibilities/combination exclusions in the
instructions for use of the products.
Reference number
Terion 1C10, Terion K2 1C11
Not resistant
Not resistant
► Inspect the product regularly for wear and tear. Do not continue
using a worn product.
► The product may only be used by one person; reuse on another
person is prohibited.
► Keep the product away from open flames, embers and other
sources of heat.
NOTICE!
Risk of product damage and limited functionality
► Do not expose the product to prohibited environmental condi­
tions.
► Check the product for damage if it has been exposed to prohib­
ited environmental conditions.
► Do not use the product if it is damaged or in a questionable con­
dition. Take suitable measures (e.g. cleaning, repair, replace­
ment, inspection by the manufacturer or a specialist workshop).
► Clean the product promptly each time after it comes into contact
with salt water, chlorinated water or abrasive media (such as
sand).
► To prevent mechanical damage, use caution when working with
the product.
► If you suspect the product is damaged, check it for proper func­
tion and readiness for use.
► Do not use the product if its functionality is restricted. Take suit­
able measures (e.g. cleaning, repair, replacement, inspection by
the manufacturer or a specialist workshop).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern and by the development of noises.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Terion 1c10Terion k2 1c11

Table of Contents