Otto Bock 4X840 Instructions For Use Manual page 7

1 Foreword
INFORMATION
Date of last update: 2021-03-01
Please read this document carefully before using the product and observe the safety
►
notices.
Obtain instruction from the qualified personnel in the safe use of the product.
►
Please contact the qualified personnel if you have questions about the product or in case of
►
problems.
Report each serious incident related to the product to the manufacturer and to the relevant
►
authority in your country. This is particularly important when there is a decline in the health
state.
Please keep this document for your records.
►
The product "4X840 Kenevo Protective Cover" is referred to simply as the Protective Cov­
er/product below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
2 Product description
2.1 Design
The product consists of the following components:
2.2 Function
The protective cover provides a means of enclosing the Kenevo electronic knee joint, including
the tube adapter, to enhance its appearance and function. The housing of the knee joint is protec­
ted against external influences by the protective cover, e.g. scratching and surface contamination.
The protective cover is not required for the proper and safe functioning of the joint.
3 Intended use
3.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
1. Protective cover main unit
2. Upper closure (one side always stays on
the main unit)
3. Lengthwise closure
4. Flexible cover cap
English
7