Otto Bock 4P862 Instructions For Use Manual page 10

8 Legal information
8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
8.2 CE conformity
Otto Bock Healthcare Products GmbH hereby declares that the product is in compliance with
applicable European ergänzen!European requirements for medical devices.
The full text of the regulations and requirements is available at the following Internet address:
http://www.ottobock.com/conformity
8.3 Trademarks
All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi­
fy the conclusion that the denotation in question is free of third-party rights.
9 Technical data
Environmental conditions
Storage and transport in original packaging
Storage and transport without packaging
Operation
General information
Reference number
Product service life
Guard weight
10 Appendices
10.1 Symbols Used
Manufacturer
Declaration of conformity according to the applicable European directives
Lot number (PPPP YYYY WW)
PPPP – plant
YYYY – year of manufacture
WW – week of manufacture
10
-25 °C/-13 °F to +70 °C/+158 °F
-25 °C/-13 °F to +70 °C/+158 °F
Max. 93 % relative humidity, non-condensing
-10 °C/+14 °F to +60 °C/+140 °F
Max. 93 % relative humidity, non-condensing
4P862
Wear part subject to normal wear and tear
225 g