Installing/Adjusting The Headrests And Neckrests; Delivery; Final Inspection; Transport To The Customer - Otto Bock Ventus Instructions For Use Manual

Delivery

66

6.11 Installing/adjusting the headrests and neckrests

Additional information on installing the assembly kit and on the adjustments of headrests or neckrests can be found
in the manufacturer's instructions for use accompanying each product.
7 Delivery

7.1 Final inspection

A final check must be carried out before the wheelchair can be handed over:
• Are all options installed according to the order form?
• Are the rear wheels correctly positioned?
• Have the tyres been correctly inflated?
INFORMATION: The correct tyre pressure is printed on the tyre sidewall. For rear wheels with high-
pressure tyres, the minimum air pressure is 7 bar.
• Has the axle unit been fastened to the slider and tightened to the specified torque?
• Can the quick-release axles rotate freely?
• Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
• Only after adjustments: Has the respective caster journal angle been adjusted vertically?
• Only after adjustments: Has the anti-tipper been adjusted correctly?

7.2 Transport to the customer

The wheelchair should be transported to the user in disassembled state using the outer packaging.

7.3 Handing over the product

The following steps must be performed for the safe delivery of the product:
• Conduct a sitting test with the user of the product. Pay special attention to proper positioning according to
medical considerations.
• The user and any attendants must be instructed in the safe use of the product. In particular, the enclosed
instructions for use (user) are to be used.
• The instructions for use (user) must be issued to the user/attendant during handover of the wheelchair.

8 Maintenance and repair

The manufacturer recommends regular maintenance of the product every 12 months.
More information on cleaning, disinfection, maintenance and repair can be found in the instructions for use (user).
The service manual contains detailed information on repairs.

9 Disposal

9.1 Disposal Information

All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
30 | Ottobock
67
Ventus