Nameplate; Delivery; Scope Of Delivery; Options - Otto Bock Ventus Instructions For Use Manual

Hide thumbs Also See for Ventus:
Table of Contents

Advertisement

WARNING
Incorrect installation of the anti-tipper/missing anti-tipper
Tipping over, falling of the user due to failure to observe the installation instructions and because of incorrect
adjustment
► Depending upon the settings of the chassis, the centre of gravity, the back angle and the experience of the
user, the use of an anti-tipper may be necessary.
► For a small wheelbase and a backrest that is tilted far back, an anti-tipper may need to be installed on both
sides, depending upon the user's experience.
► Verify that the anti-tipper has been installed and adjusted properly. Find the appropriate position with the
assistance of a helper.
CAUTION
Incorrect fitting of the rear wheels
Tipping, falling over of the user due to wheels coming off
► After each assembly, verify the proper fit of the rear wheels. The quick-release axles must be firmly locked in
the wheel attachment.

3.4 Nameplate

Label
The nameplate is located on the crossbrace.
See the instructions for use (user) for additional warning labels.

4 Delivery

4.1 Scope of delivery

The wheelchair is delivered preassembled and with the rear wheels removed packed in a crate.
The scope of delivery includes:
Preassembled wheelchair
2 rear wheels
Options according to the order
Instructions for use (qualified personnel), instructions for use (user)
The seat cushion is not included in the standard package.

4.2 Options

The functionality and operation of the options are described in more detail in the instructions for use (user).
All of the available options/accessories are listed on the order form.
Ventus
A Type designation
B Manufacturer article number
C Maximum load capacity (see section "Technical Data")
D Manufacturer information, address, country of origin
E Serial number/manufacturing date
F European Article Number/Global Trade Item Number
G Read the instructions for use before using the product.
H The product has not been approved by the manufacturer for use
as a seat in a wheelchair accessible vehicle
I
CE marking – product safety in accordance with EU directives
H Depending on the version of the nameplate: The product has
not been approved by the manufacturer for use as a seat in
vehicles for transporting persons with reduced mobility
Meaning
Delivery
Ottobock | 7

Advertisement

Table of Contents
loading

Table of Contents