Table of Contents
Advertisement
Figure 79: SIP Dial Easy2Connect – connection and data transfer
2.
In the "Phonebook" block you can see the contacts configured in section 18.1.2 "Create new SIP Phonebook
Entries" on page 96. Select a SIP contact entry for data transfer and click the green icon
The selected contact appears in the "Call" block and is now ready for connection.
3.
Click the green icon
4.
To hang up the connection click the red icon
5.
For a quick dial change the encoder configuration manually in the "Encoder/Decoder" block and enter the dial
number directly into the "Connect" field. For manual access to the connection settings for decoder, deactivate
the virtual switch "Use default settings":
6.
In the "Details/Overview" tab in the same menu you can see the details of the activated SIP connections for
decoder and of the current data transfer (see Figure 80):
User Manual IP-4c V1.96
in the "Call" block to establish the connection.
in the "Call" block.
near the entry.
99
Advertisement
Table of Contents
