Table of Contents
Advertisement
Figure 40: Decoder Configuration
3.
To configure the "Main Source" for each audio output, assign a preconfigured "Input Source" in the
"Source/Profile Assignment" block, that should be received and decoded, in the corresponding dropdown menu
by clicking the arrow
NOTE: You can use [XLR] audio inputs as a backup source fed from an external device (for example a satellite
receiver) or for a loop-back test.
NOTE: You can decode and play files from an internal storage. This option is recommended as an advanced
redundancy for Backup Sources in case of IP input failure.
NOTE: If you have activated FEC and use buffer, see section 14.5 "Set up Buffer" on page 69 for
more information about the delay configuration.
4.
Analogously configure the Backup Sources 1-3.
5.
Click the "Save" button to save the changes.
You can quickly edit the Main source or Backup Sources 1-3 directly for each decoder in the "Input Source Assignment"
block by clicking the
You can also change the "Source Assignment" directly in the dropdown menu for each decoder in the "Input Source
Assignment" block by clicking the arrow
User Manual IP-4c V1.96
or drag and drop the "Input Source" from the "Input Sources" block.
symbol in the corresponding source field (see Figure 41).
in the corresponding source field (see Figure 41).
66
Advertisement
Table of Contents
