Table of Contents
Advertisement
In this menu you can activate the automatical synchronization of the device clock via NTP by activating a virtual
switch to "ON" and configure or change the following parameters:
1. SNTP Server IP
2. SNTP Server IP
Update interval [min. 30 sec]
Last synchronization
Save the changes by clicking the "Save" button.
NOTE: Additionally, you can read out and manually set up the current date and time in the internal
clock of the device under System Settings→Time (see section 20.9 "Set up Time" on page 108).
User Manual IP-4c V1.96
IP address of the first NTP server to be used.
IP address of the second NTP server to be used.
Time interval for synchronizing the device clock with the NTP server in
seconds.
Information about the last synchronization.
28
Advertisement
Table of Contents
