Table of Contents
Advertisement
To generate a constant determined sampling rate for digital AES/EBU inputs/outputs, follow steps below:
1.
Select Interface Settings→Audio XLR in the web interface of the IP-4c (see Figure 64).
Figure 64: Interface settings – Audio XLR (> 1.26 App version)
2.
Activate "Sample Rate Converter" by selecting "ON" in the corresponding virtual switch for available digital
audio inputs and outputs.
3.
Click the "Save" button to save the settings.
The sample rate converter generates an exact sampling rate in the input/output audio, which the user has configured in
the web interface.
NOTE: "Sample Rate Converter" switched off corresponds to the activated "Transparent Mode" in the MM01 devices
and to the activated "SRC Bypass" in earlier IP-4c versions (< 1.26 App version, see Figure 65).
User Manual IP-4c V1.96
87
Advertisement
Table of Contents
