Figure 48: System Information – Decoder State
The status color means:
- active for decoding and is currently used for audio output
- deactivated
- error
6.
In the left block you can view the name of the input stream, the type and the address of the activated data
inputs Data 1/2.
7.
In the "Audio" block you can view the status and the current parameters of the decoding audio (see decoder
settings under Codec Settings→Codec→Input Sources, see section 11 "Preset Input Sources" on page 29).
The following abbreviations are used for the configured coder parameters:
−
Bitrate - audio bit rate
−
SR – Sampling Rate
−
Buffer – Delay Buffer for decoded audio
−
Error – the number of errors in the decoder (e.g. failed samples, no audio, PER etc.)
User Manual IP-4c V1.96
72