2wcom IP-4c User Manual page 41

Name:
Ancillary Data Source:
4. Click the "Save" button to save the changes.
NOTE: For further audio interface settings see section 17.1 "Audio XLR" on page 86.
User Manual IP-4c V1.96
Assign a name to the Audio Input Setting for better reference.
If the input of the decoder contains ancillary data, the IP-4c can forward them to the
[Data] or [DTE] outputs. In this case, enable the switch for ancillary data. For more
information on ancillary data, see 12 Ancillary Data Settings.
41