Table of Contents
Advertisement
Figure 26: Presets for multiplexer outputs
For each TS Multiplex 1-8 you can create and save up to 32 destination streams for all TS outputs over IP and also
activate an ASI output (optional):
Output Stream
Possible streams for IP outputs are TS/IP and TS/SRT. Configure multiplex 1-8 outputs for TS over IP interfaces under
Codec Settings→TS Multiplexer as follows:
User Manual IP-4c V1.96
Description
TS/IP – Transport stream over IP using UDP/RTP,
Unicast/Multicast (optional: "TS Encoder" right)
TS/SRT – Transport stream over IP using SRT
(Secure Reliable Transport)
(optional: "TS Encoder" and "SRT Encoder" rights)
Transport stream over ASI Output (optional)
Output Interface
[Data 1/Data 2]
[Data 1/Data 2]
[ASI OUT]
49
Advertisement
Table of Contents
