Table of Contents
Advertisement
14. To monitor the current input audio signal over headphone, open the field Headphone under Interface
Settings→Headphone (see Figure 66 on page 88). Select the audio input for monitoring in the "Source"
dropdown menu.
15. Under Status→Log you can call up information about the encoder status, device operation, data distribution
and errors since the last event log deleting. A list with a description of the events with the timestamps is
displayed in this menu (see section 20.5 "View the Log" on page 106, Figure 88).
NOTE: Configure alarm monitoring under System Settings→Alarm (see section 15.2). If the alarm
monitoring for any parameter is deactivated, no information about the corresponding error will be
shown in the log.
To invert the GPOs and see the status of the switched GPO in case of a triggered alarm, open the
menu Interface Settings→GPO and see step 4. on page 91 in section 17.4 "GPO".
User Manual IP-4c V1.96
64
Advertisement
Table of Contents
