Table of Contents
Advertisement
WARNING
WARNING of explosive atmosphere
Risk of the explosion hazard.
Do not use the device in an explosive environment.
WARNING of hot surface
The device is equipped with an active cooling system. The surface of the device can still heat up
during operation.
Do not touch the surface of the device during operation.
CAUTION: Risk of equipment damage
Before the first operation:
Check the housing, the front panel, the supply cord and the plug for visible damage (e.g. scratches,
cracks, damaged isolation and abrasion)
In case of damage, unplug immediately the supply cord. Never operate device with a damaged
supply cord.
All damaged components must be replaced immediately.
Installation:
Use only a grounded three-wire power supply cord and -plug that complies with the national
regulations.
If necessary, another than the supplied supply cord has to be used, in compliance with the
regulations of the country where the device is operated.
Make sure that the AC power outlet is next to the device and readily accessible to the user.
Installation of other devices:
External devices which are connected to the device could be damaged by the device or damage the
device itself if the output levels exceed the specified limits.
Cleaning:
Do not use corrosive detergents on the device such as benzine, thinner, alcohol or acetone. Clean
the surface of the device only with a soft dry cloth.
User Manual IP-4c V1.96
11
Advertisement
Table of Contents
