Table of Contents
Advertisement
Figure 54: Live listening settings
2.
Enable the live streaming by activating the virtual switch "ON".
3.
Enter the port number for streaming.
NOTE: The URL for Icecast streaming "IP address of the device:streaming port" (standard port for live
streaming is 8000, e.g. http://192.168.12.23:8000 ).
4.
Select an audio format for streaming in the dropdown menu "Encoder Format": MPEG Layer2, MPEG Layer 3,
AAA-LC, HE-AACv1 and HE-AACv2.
5.
Select stereo or mono audio mode for live streaming in the dropdown
menu "Audio Mode": Mono (L/R), Mono (Downmix), Dual Mono, Stereo,
Joint Stereo.
6.
Select a sample rate for the streaming in the dropdown menu "Sampling
Rate".
Available options are: 16 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz.
7.
Select bit rate for the selected audio format quality in the dropdown
menu "Bitrate".
8.
Click the "Save" button to save the changes.
9.
To start audio streaming, use the menu in the right top corner of the IP-4c
web interface (see red frame in Figure 56):
a) In the "Live Source" field, select available configured audio sources
for Streaming (see Figure 55).
b) Start/stop the streaming by clicking the play/pause button.
c) Change the playback value by clicking the green volume levels.
d) Alternatively, you can start/stop live streaming directly for each
audio input individually by clicking the "Loudspeaker" icon in the
corresponding source field (see red frame in Figure 56).
User Manual IP-4c V1.96
Figure 55: Live source choice
79
Advertisement
Table of Contents
