The display consists of the two main navigation menus:
•
Status overview (turn the jog wheel left or right)
•
Configuration menu (push the jog wheel)
Via display and jog wheel you can:
•
configure network settings for the first access to the device over the web user interface
•
view the device status
•
configure outputs headphone interface
•
reset admin password
•
reset to system defaults
•
reboot the device
NOTE: In this user manual, if a certain configuration is possible over the LCD/jog wheel, the
corresponding menu path is shown at the end of the section, for example:
LCD menu: Configuration Menu→Network→Data 1
After the warmstart/coldstart of the device the display shows the default screen of the "Status Overview" menu:
NOTE: If you navigate in the LCD menu, the display changes after some minutes to the "Status
Overview" menu.
−
To change from the default "Status overview" menu to the "Configuration menu", push the jog wheel.
−
To move the cursor in the menu structure, turn the jog wheel.
−
To open a menu entry or to confirm a setting, push the jog wheel.
−
To select a configurable menu entry, turn the jog wheel.
−
To adjust a menu entry, push and then turn the jog wheel.
−
To confirm the adjustment, push the jog wheel.
−
To return to a previous menu level, activate the menu entry "<<".
−
Some settings need a restart of the device to be activated.
User Manual IP-4c V1.96
16