I Break-In Function - Icom IC-746PRO Instruction Manual

I Break-in function

The break-in function is used in CW mode to automat-
ically toggle the transceiver between transmit and re-
ceive when keying. The IC-746PRO is capable for full
break-in or semi break-in.
D D Semi break-in operation
During semi break-in operation, the transceiver selects
transmit when keying, then automatically returns to re-
ceive after a pre-set time from when you stop keying.
q Push [CW/RTTY] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the semi
break-in function ON.
• "BK-IN" appears.
e Set the break-in delay time (the delay from transmit
to receive).
➥ Push [VOX/BK-IN] for 1 sec. to select break-in
delay program mode.
➥ Rotate the tuning dial to select the desired delay.
• Push [F3] for 1 sec. to select to the default value.
r Push [MENU] to return to the previous menu.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
D D Full break-in operation
During full break-in operation, the transceiver automati-
cally selects transmit while keying and returns to receive
immediately after keying is finished.
q Push [CW/RTTY] to select CW or CW-R mode.
w Push [VOX/BK-IN] several times to turn the full
break-in function ON.
• "FBK-IN" appears.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
FUNCTIONS FOR TRANSMIT
[VOX/BK-IN]
Break-in indicator
Shows break-in delay time
Full break-in indicator
6
56